Swift GA L4-1298cc 1.3L SOHC MFI (2001)
^
Embossed marks are provided on each camshaft housing, indicating position and direction for installation. Install housing as indicated by these
marks.
^
As camshaft housing No. 1 retains camshaft in proper position as to thrust direction, make sure to first fit No. 1 housing to No. 1 journal of
camshaft securely.
^
After applying engine oil to housing bolts, tighten them temporarily first. Then tighten them by the sequence as indicated in figure. Tighten a
little at a time and evenly among bolts and repeat tightening sequence three to four times before they are tightened to specified torque.
Tightening Torque
(a): 11 Nm (1.1 kg-m, 8.0 ft. lbs.)
7. Install camshaft oil seal. After applying engine oil to oil seal lip, press-fit camshaft oil seal till oil seal surface becomes flush with housing surface.
8. Install timing belt inside cover.
