Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Fuel Line Coupler: Service and Repair
FUEL PIPE
REMOVAL
1. Relieve fuel pressure in fuel feed line according to procedure.
2. Disconnect negative cable at battery.
3. Disconnect fuel pipe joint and fuel hose from fuel pipe at the front and rear of each fuel pipe.
For quick joint, disconnect it as follows:
1. Remove mud, dust and/or foreign material between pipe and joint by blowing compressed air.
2. Unlock joint lock by inserting special tool between pipe and joint.
Special Tool
(A): 09919-47020
3. Disconnect joint from pipe.
WARNING: A small amount of fuel may be released after fuel hose is disconnected. In order to reduce the chance of personal injury,
cover hose and pipe to be disconnected with a shop cloth.
Be sure to put that cloth in an approved container when disconnection is completed.
4. Disconnect brake pipe from pipe joint.
5. Remove pipe cover from body.