Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Sensing and Diagnostic Module: Testing and Inspection
CAUTION:
-
Do not connect a tester whatever type it may be.
-
Never repair or disassemble SDM.
-
If SDM was dropped from a height of 91.4 cm (3 ft) or more, it should be replaced.
-
Check SDM and its bracket for dents, cracks or deformation.
-
Check SDM connector or lock mechanism for damage or cracks.
-
Check SDM terminal for bent, corrosion or rust. If any faulty condition is found in above checks, replace.
