Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Sensing and Diagnostic Module: Service and Repair
Sensing and Diagnostic Module (SDM)
WARNING: During service procedures, be very careful when handling a Sensing and Diagnostic Module (SDM).
-
Never strike or jar the SDM.
-
Never power up the air bag system when the SDM is not rigidly attached to the vehicle. All SDM and mounting bracket fasteners must be
carefully torqued to ensure proper operation of the air bag system. The SDM could be activated when powered while not rigidly attached
to the vehicle which could cause deployment and result in personal injury.
REMOVAL
1. Disconnect negative cable at battery.
2. Disable air bag system.
3. Remove center console.
