suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Checking For Fluid Leakage|Page 2388 > < Checking For Fluid Leakage|Page 2386
Page 4
background image

Limit 0.06 mm (0.0023 inch) 

Replace pump assembly if any defect is found in above checks.

Relief Valve (Flow Control Valve) and its Spring 

-

Check fluid passage of relief valve and orifice of connector for obstruction (clogged).

-

Check sliding surface of relief valve for wear and damage.

-

Check free length of relief valve spring.
Free length:

Standard 36.5 mm (1.43 inch) 
Limit 33.5 mm (1.32 inch) 

Replace pump assembly if any defective is found.

REASSEMBLY 

Reverse disassembly procedure for assembly, noting the following.

1. Apply power steering fluid to shaft outer surface and insert it from oil seal side.

2. Apply power steering fluid to O-rings and fit them to pump body.
3. Install side plate to pump body aligning pin grooves of side plate and cover bolts holes.

Checking For Fluid Leakage|Page 2388 > < Checking For Fluid Leakage|Page 2386