Swift GA L4-1298cc 1.3L SOHC MFI (2001)
2. Connect tie rod end to knuckle. Tighten castle nut until holes for split pin are aligned, but only within specified torque.
Tightening Torque (a): 45 Nm (4.5 kg-m, 32.5 ft. lbs.)
3. Bend new split pin.
4. Inspect for proper toe.
5. After confirming proper toe, tighten tie rod end lock nut to specified torque.
Tightening Torque (b): 45 Nm (4.5 kg-m, 32.5 ft. lbs.)
6. Tighten wheel to specified torque and lower hoist.
Tightening Torque for wheel nuts: (a): 65 Nm (6.5 kg-m, 47.0 ft. lbs.)
