Swift GA L4-1298cc 1.3L SOHC MFI (2001)
2. Install control rod inside bolt with its cam (B) faced down.
3. Tighten control rod nuts (inside & outside) to such extent that they can be turned by hand.
4. Connect brake flexible hose to bracket securely.
5. Install wheel and tighten wheel nuts to specified torque.
6. Lower hoist.
7. Tighten control rod outside nut and inside nut to specified torque. It is the most desirable to have vehicle off hoist and in non-loaded condition
when tightening them.
NOTE: Tighten inside nut with line (A) stamped on body aligned with such line as confirmed before removal or match marks aligned.
Tightening Torque (a): 80 Nm (8.0 kg-m, 58.0 ft. lbs.)
8. Check rear toe and adjust it as necessary.
