Swift GA L4-1298cc 1.3L SOHC MFI (2001)
9. Remove strut lower mount bolt
10. Remove knuckle lower mount bolt.
11. Disconnect knuckle from suspension arm and remove knuckle from strut.
If it is hard to remove knuckle from strut, open slit of knuckle a little by inserting wedge there.
CAUTION: Don't open slit wider than necessary.
INSTALLATION
1. Install knuckle to strut.
Bring projection "A" on strut against slit of knuckle and push strut into knuckle till upper end of knuckle contacts "B" on strut as shown in figure.
