Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Wheels: Initial Inspection and Diagnostic Overview
Front
WHEEL DISC, NUT & BEARING
1. Inspect each wheel disc for dents, distortion and cracks. A disc in badly damaged condition must be replaced.
2. Check wheel nuts for tightness and, as necessary retighten them to specification.
Tightening Torque (a): 65 Nm (6.5 kg-cm, 47.0 ft. lbs.)
3. Check wheel bearing for wear. When measuring thrust play, apply a dial gauge to wheel hub center after removing wheel center cap from wheel
disc.
Thrust play limit: 0.4 mm (0.016 inch)
When measurement exceeds limit, replace bearing.
4. By rotating wheel actually, check wheel bearing for noise and smooth rotation. If defective, replace bearing.
Rear
WHEEL DISC, NUT & BEARING
-
Inspect each wheel disc for dents, distortion and cracks. A disc in badly damaged condition must be replaced.
-
Check wheel hub nuts for tightness and, as necessary, retighten to specification.