Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Front Bumper: Service and Repair
Front Bumper Removal and Installation
NOTE:
-
Fasteners are important attaching parts in that they could affect the performance of vital components and systems, and/or could result in major
repair expense. They must be replaced with one of the same part number or with an equivalent part if replacement becomes necessary.
-
Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to assure proper
retention of these parts.
Removal
1. Remove bumper bolts (2), bumper side screws (3), bumper lower screw (6) and air guide clip (8) as shown in the figure.
2. Remove bumper (1) with bumper member (4).
3. Remove bumper member.
Installation
Reverse removal procedure for installation.
Tightening torque
Bumper screw (a): 1.5 N.m (0.15 kg-m, 1.0 lbf-ft)
