Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Rear Bumper: Service and Repair
Rear Bumper Removal and Installation
Rear Bumper Components
NOTE:
-
Fasteners are important attaching parts in that they could affect the performance of vital components and systems, and/or could result in major
repair expense. They must be replaced with one of the same part number or with an equivalent part if replacement becomes necessary.
-
Do not use a replacement part of lesser quality or substitute design. Torque values must be used as specified during reassembly to assure proper
retention of these parts.
Removal
1. Remove back panel (1) inner trim.
2. Remove rear bumper nuts and bumper side screw as shown in the figure.
3. Disconnect coupler of licence plate light.
4. Remove bumper (4), with member.
5. Remove bumper member.