Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Brake Caliper: Service and Repair
Removal and Installation
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove brake flexible hose mounting bolt from caliper. As this will allow fluid to flow out of hose, have a container ready before hand.
3. Remove caliper pin bolts.
4. Remove caliper from carrier.
INSTALLATION
1. Install caliper to caliper carrier.
2. Torque caliper pin bolts to specification.
NOTE: Make sure that boots are fit into groove securely.
Tightening Torque (a): 27 Nm (2.7 kg.m, 19.5 ft. lbs.)
