Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Installation
For installation, reverse removal procedure and note following precautions.
-
Replace injector O-ring with new one using care not to damage it.
-
Check if cushion is scored or damaged. If it is, replace with new one.
-
Apply thin coat of fuel to O-rings and then install injectors into delivery pipe and intake manifold.
Make sure that injectors rotate smoothly. If not, probable cause is incorrect installation of O-ring. Replace O-ring with new one.
-
Tighten delivery pipe bolts and make sure that injectors rotate smoothly.
-
After installation, with engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.