Swift GL L4-1298cc 1.3L SOHC MFI (2000)
Throttle Body: Service and Repair
On Vehicle Service
REMOVAL
1. Relieve fuel pressure according to procedure. Refer to Powertrain Management; Fuel Delivery and Air Induction.
2. Disconnect negative cable at battery.
3. Drain cooling system.
WARNING: To help avoid danger of being burned, do not remove drain plug and radiator cap while engine and radiator are still hot.
Scalding fluid and steam can be blown out under pressure if plug and cap are taken off too soon.
4. Remove air cleaner outlet hose with resonator.
5. Disconnect accelerator cable from throttle body.
6. Disconnect following electric lead wires and release clamp:
^
Ground wires from intake manifold
^
TP sensor
^
IAC valve
^
Fuel injectors
^
EVAP canister purge valve
^
MAP sensor
