Swift GL L4-1298cc 1.3L SOHC MFI (2000)
9. Apply adhesive (1) along upper and lower molding (3) as shown.
NOTE:
-
Start from bottom side of glass (2).
-
Height of applied adhesive should exceed that of trim and molding.
Adhesive amount specification
Height "b": Approx. 14 mm (0.55 in.)
Width "c": Approx. 7 mm (0.28 in.)
Dimension "d": Approx. 5 mm (0.20 in.)
Dimension "e": Approx. 3 mm (0.12 in.)
-
Be careful not to damage primer.
-
Press glass against body quickly after adhesive is applied.
-
Use of rubber sucker grips is helpful to hold and carry glass after adhesive is applied.
