suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Procedures|Page 5270 > < Procedures|Page 5268
Page 26
background image

Failure to follow procedures may result in fire or personal injury.

13. Separate two banana plugs (1) on deployment harness.
14. Connect deployment harness to 12 volts vehicle battery (2). This will immediately deploy or activate air bag (inflator) module or seat belt

pretensioner.

15. Disconnect deployment harness from 12 volts vehicle battery (2) and short two deployment harness leads together by fully seating one banana

plug into the other.

16. In the unlikely event that air bag (inflator) module or seat belt pretensioner did not deploy / activate after following these procedures, proceed

immediately with Step 22) through 25). If air bag (inflator) module or seat belt pretensioner did deploy or activate, proceed with Steps 18) through
21).

17. Put on pair of shop gloves to protect your hands from possible irritation and heat when handling deployed air bag (inflator) module or activated

seat belt pretensioner.

18. Disconnect adapter cable (special tool) from air bag (inflator) module or seat belt pretensioner as soon as possible. This will prevent adapter cable

(special tool) from damage due to possible contact with hot air bag (inflator) module or hot seat belt pretensioner.

19. Check adapter cable as follows.

^

For air bag (inflator) module Be sure to check air bag (inflator) module adapter cable (special tool) for damage after deployment and replace it
with new adapter cable (special tool), if it is damaged.

^

For seat belt pretensioner Be sure to check seat belt pretensioner adapter cable (special tool) for damage after seat belt pretensioner is
activated. Replace it with spare connector (special tool) or new adapter, if necessary.

20. Dispose of deployed air bag (inflator) module (1) or activated seat belt pretensioner (2) through normal refuse channels after it has cooled for at

least 30 minutes and tightly seal air bag (inflator) module (1) or seat belt pretensioner (2) in strong vinyl bag. Refer to Deployed Air Bag
(Inflator) Module and Activated Seat Belt Pretensioner Disposal:Advanced Air Bag for details.

Procedures|Page 5270 > < Procedures|Page 5268