SX4 2WD L4-2.0L (2007)
genuine parts only.
Seat Belt
^
The seat belt webbing or strap should be free from damage.
Retractor (with Seat Belt Pretensioner)
1. Let the seat belt retract fully to confirm its easy retraction.
^
The retractor should lock webbing when pulled quickly.
^
The front seat belt retractor (1) should pass the inspection and should lock webbing even when tilted (approx. 15°) toward the fore and aft or
right and left directions.
2. Check retractor (1) with seat belt pretensioner appearance visually for following symptoms and if any one of them is applicable, replace it with a
new one as an assembly.
^
Pretensioner has activated.
^
There is a crack in seat belt pretensioner (retractor).
^
Seat belt pretensioner (retractor) is damaged or a strong impact (e.g., dropping) was applied to it.
Anchor Bolt
^
Anchor bolts should be torqued to specification.
Belt Latch
^
It should be secure when latched.
Seat Belt Buckle Switch (Except Advanced Air Bag Model)
Check driver side seat belt switch and passenger side seat belt switch for continuity by using ohmmeter.
