SX4 4WD L4-2.0L (2008)
there is a short to ground between terminals "A-1" and "C-1" of the circuit.
4. Disconnect the connector included in circuit (connector-B) and measure resistance between "A-1" and body ground. If continuity is indicated, it
means that the circuit is shorted to the ground between terminals "A-1" and "B-1".
How to Read Connector Codes and Terminal Nos.
HOW TO READ CONNECTOR CODES AND TERMINAL NOS.
1. Connector code/Terminal No./Terminal layout
^
The connector shape and terminal layout shown are those when viewed from "Z" in the illustration
Refer to List of Connectors.