SX4 4WD L4-2.0L (2008)
17.
Re-install the cowl top garnish and wiper arms. Torque wiper arm nut to 18 Nm (13 lb-ft).
18.
Release the glove box damper and lower the glove box.
19.
Remove the glove box by squeezing the sides to allow the limiting bumper to pass through the opening. Then lower enough to allow the hinge to
release and set the glove box aside.
20.
Remove the filter cover from the blower case. Squeeze the tabs together on both sides and slide the cover straight out.
