SX4 4WD L4-2.0L (2008)
13.
Install the cowl vent cover at the center position and right position.
14.
Slide the rear side of the vent cover onto the existing stud.
15.
Remove the existing nut and mount the front side of the vent cover with the removed nut.
16.
Installation of the center vent cover is similar.
17.
Re-install the cowl top garnish and wiper arms. Torque wiper arm nut to 18 Nm (13 lb-ft).
18.
Release the glove box damper and lower the glove box.