SX4 4WD L4-2.0L (2008)
Steering Angle Sensor: Service and Repair
(ESP) Steering Angle Sensor Removal and Installation
Steering Angle Sensor Removal and Installation
Removal
1. Remove steering wheel and contact coil cable assembly. Refer to Steering Wheel Removal and Installation and Contact Coil Cable Assembly
Removal and Installation.
2. Remove steering angle sensor (2) from contact coil cable assembly (3) while opening fitting parts (1) of contact coil cable assembly.
Installation
1. Install steering angle sensor (2) by fitting engagement parts (1) of contact coil cable assembly to claws of steering angle sensor as shown in figure.
