SX4 4WD L4-2.0L (2008)
Installation
1. Check that no foreign material is attached to sensor (1) and wheel speed sensor encoder (included in wheel hub assembly).
2. Install it by reversing removal procedure.
NOTE: Before fitting wheel speed sensor, be sure to silicon grease to its O-ring.
Tightening torque
Front wheel speed sensor bolt (a): 11 Nm (1.1 kgf-m, 8.0 ft. lbs.)
Front wheel speed sensor harness clamp bolt (b): 11 Nm (1.1 kgf-m, 8.0 ft. lbs.)
