SX4 4WD L4-2.0L (2008)
5. Measure voltage at resistance without wheel rotation. If voltage is out of specification, check sensor, mating encoder and their installation
conditions.
Voltage at the resistance (115 ohms) without wheel rotation: 680 - 960 mV
6. Measure voltage at resistance with wheel rotation and confirm voltage alternately changes between high and low voltages. If voltage does not
change with wheel rotation, check sensor, mating encoder and their installation conditions.
Voltage at the resistance (115Q) with wheel rotation:
High voltage "a": 1360 - 1930 mV
Low voltage "b": 680 - 960 mV
Reference
When using oscilloscope for this check, check if peak-to-peak voltage and waveform meet specification.
Peak-to-peak voltage at the resistance (115 ohms) with wheel rotation
High voltage "a": 1360 to 1930 mV
Low voltage "b": 680 to 960 mV