SX4 4WD L4-2.0L (2008)
3. Connect flexible hose (3) to caliper as shown in figure.
4. Torque flexible hose joint bolt to specification.
Tightening torque
Flexible hose joint bolt a: 23 Nm (2.3 kgf-m, 17.0 ft. lbs.)
WARNING:
^
Make sure that flexible hose is not twisted when tightening joint bolt. If it is twisted, reconnect it using care not to twist it.
^
Be sure to direct mark (1) to inside of vehicle (2) as shown in figure.
5. Tighten bleeder plug to specified torque.
Tightening torque
Bleeder plug b: 9 Nm (0.9 kgf-m, 6.5 ft. lbs.)