SX4 4WD L4-2.0L (2008)
^
Before installing piston seal to cylinder, apply fluid to them.
^
Install a piston seal into groove in cylinder securely making sure that it is not twisted.
1. Apply thread lock cement to shaft thread (6) of caliper.
"A": Thread lock cement 99000-32110 Thread Lock Cement Super 1322
2. Apply grease to inside of new shaft cover (1).
3. Install new shaft cover, lever (2), washer (3), parking nut (4) and return spring (5) to caliper.
Tightening torque
Parking nut a: 27 Nm (2.7 kgf-m, 19.5 ft. lbs.)
