SX4 4WD L4-2.0L (2008)
3. Install wheel cylinder and connect brake pipe flare nut, and then tighten wheel cylinder bolts and flare nut to specified torque.
4. Install brake shoe.
5. Install brake drum.
6. Fill reservoir with brake fluid and bleed brake system.
7. Upon completion of all jobs, start engine and then depress brake pedal with about 300 N (30 kg, 66 lbs) load at least 3 times until adjuster
actuator clicking sound from drum brake can not be heard so as to obtain proper drum-to-shoe clearance. Adjust parking brake cable.
8. Install rear wheel.
9. Check to ensure that brake drum is free from dragging and proper braking is obtained. Perform brake test (foot brake and parking brake).
