SX4 4WD L4-2.0L (2008)
Step 1
Step 2-Step 4
ABS Hydraulic Unit Operation Check
ABS Hydraulic Unit Operation Check
1. Check that basic brake system other than ABS is in good condition.
2. Check that battery voltage is 11 V or more.
3. Hoist vehicle.
4. Set transmission to neutral (P range for A/T) and release parking brake.
5. Turn each wheel gradually by hand to check if brake dragging occurs. If it does, correct.
6. Connect SUZUKI scan tool to data link connector (DLC) (1) with ignition switch OFF.
Special Tool (A): SUZUKI scan tool