SX4 4WD L4-2.0L (2008)
Thermostat: Service and Repair
Thermostat Removal and Installation
Removal
1. Drain coolant.
2. Disconnect radiator outlet hose from thermostat cap (1).
3. Remove thermostat cap (1) from water pump (2).
4. Remove thermostat from water pump (2).
Installation
Reverse removal procedure for installation noting the following points.
^
When positioning thermostat (1) on water pump case, be sure to position it so that air bleed valve (2) comes at match mark (3) and into the
recession of water pump case.