SX4 4WD L4-2.0L (2008)
Timing Cover: Service and Repair
Timing Chain Cover Removal and Installation
Removal
1. Remove engine assembly from vehicle.
2. Remove oil pan.
3. Remove cylinder head cover.
4. Remove crankshaft pulley bolt.
To lock crankshaft pulley (1), use special tool (camshaft pulley holder) as shown in figure.
Special Tool (A):09917-68221
NOTE: Be sure to use the following bolts instead of pins in order to fix crankshaft pulley by special tool. Bolt size: M8, P1.25 L = 25 mm (0.98
in.) Strength: 7T
5. Remove crankshaft pulley (1).
To remove crankshaft pulley, use special tools (Steering wheel remover, Bearing puller attachment) with it as shown in figure.
Special Tool
(A):09944-36011
(B):09926-58010