SX4 4WD L4-2.0L (2008)
Reverse removal procedure noting the following instructions.
^
Before installing actuator, make sure that position of actuator lever is in between "BENT" position and "DEF" position.
^
Be sure to insert pin (1) of air flow control actuator into the groove (2) of link.
Air Intake Actuator Removal and Installation
Air Intake Actuator Removal and Installation
Remove and install air intake actuator referring to Air Intake Control Actuator Removal and Installation.
Temperature Control Actuator Removal and Installation
Temperature Control Actuator Removal and Installation
Removal
1. Disconnect negative (-) cable at battery.
2. Remove steering column hole cover from instrument panel.
3. Remove driver side foot duct from HVAC unit.
