SX4 4WD L4-2.0L (2008)
Blower Motor: Service and Repair
HVAC - Heater and Ventilation
Blower Motor Removal and Installation
Reference: HVAC Unit Components See: Service and Repair/Removal and Replacement
Removal
1. Disconnect negative (-) cable from battery.
2. Disconnect connector (1) from blower motor (2).
3. Remove blower motor (2) from HVAC unit as follows.
a. Remove screws (4).
b. Release tub (3) to arrow direction.
c. Hold Step b) and turn blower motor (2) to arrow direction.
Installation
Reference: Blower Motor Inspection
Reverse removal procedure.