SX4 4WD L4-2.0L (2008)
Cabin Ventilation Duct: Service and Repair
Center Ventilation Louver Removal and Installation
Center Ventilation Louver Removal and Installation
Removal
1. Disconnect negative (-) cable from battery.
2. Remove audio unit from instrument panel referring to Audio Unit Removal and Installation (If Equipped).
3. Remove center ventilation louver (1) with garnish (2) from instrument panel, and then disconnect connector from hazard switch.
NOTE: Garnish is fitted to instrument panel with six clips. When removing garnish from instrument panel, be careful not to break them.
4. Separate center ventilation louver and garnish.
Installation
Reverse removal procedure.