SX4 4WD L4-2.0L (2008)
Condenser HVAC: Service and Repair
Condenser Assembly Removal and Installation
CAUTION: Do not damage condenser fins. If condenser fin is bent, straighten it by using flat head screwdriver or pair of pliers.
Removal
1. Recover refrigerant from A/C system referring to Operation Procedure for Refrigerant Charge:Manual Type.
NOTE: The amount of removed compressor oil must be measured for replenishing compressor oil.
2. Remove front bumper referring to Front Bumper and Rear Bumper Components.
3. Disconnect discharge hose (1) and liquid pipe (2) from condenser assembly (3).
4. Remove radiator assembly and condenser assembly mounting bolts (4).