SX4 4WD L4-2.0L (2008)
Solar Sensor: Testing and Inspection
Sunload Sensor Inspection
Reference: Sunload Sensor Removal and Installation:Automatic Type
1. Light over sunload sensor vertically with an incandescent light of approximately 100 W. The distance between sunload sensor and light should be
approximately 100 mm (3.94 in.).
2. Measure voltage between terminals "a" and "b" of sunload sensor as shown in figure. If check result is not satisfactory, replace sunload sensor with
new one.
Sunload sensor voltage specification
"a" - "b": Approx. 0.38 - 0.42 V