SX4 4WD L4-2.0L (2008)
For sedan model with rear separate seat:
a. Connect black connector (1).
b. Lock connector with lock button (2).
c. Install rear pillar inner trim.
d. Install rear seat side back referring to Rear Seat Components.
e. Install rear side sill scuff.
For sedan model with rear bench seat:
a. Connect black connector (1).
b. Lock connector with lock button (2).
c. Install rear pillar inner trim.
d. Install seat cushion and seat back referring to Rear Seat Components
8. Install "A/B" fuse to fuse box.
9. Connect negative (-) cable at battery.
10. Turn ignition switch to ON position and verify that "AIR BAG" warning light flashes 6 times and then turns OFF. If it does not operate as
described, perform Air Bag Diagnostic System Check:Advanced Air Bag. See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Air Bag Diagnostic System Check/Advanced Air Bag
