SX4 4WD L4-2.0L (2008)
Electronic Throttle Actuator: Adjustments
Electric Throttle Body System Calibration
NOTE: If the service described under the Precautions of Electric Throttle Body System Calibration is performed, calibrate electric throttle body system
as follows.
1. If electric throttle body assembly and/or APP sensor assembly are replaced, perform the following steps.
a. Disconnect negative cable at battery for 20 seconds or more for the purpose of clearing calibration data of closed throttle position from
memory in ECM.
b. Connect negative cable to battery.
2. Keep ignition switch at ON position for 5 seconds or more without running engine.