SX4 4WD L4-2.0L (2008)
Engine Control Module: Service Precautions
Precautions of Electric Throttle Body System Calibration
Precautions of Electric Throttle Body System Calibration
After performing one of works described below, it is necessary to re-register the completely closed throttle valve reference position stored in memory of
ECM. (For detailed information, refer to Description of Electric Throttle Body System Calibration.) For the procedure to register such data in ECM,
refer to Electric Throttle Body System Calibration.
^
To shut off backup power of ECM for such purposes of battery replacement or "DOME" fuse removal.
^
To erase DTCs P0607, P0122, P0123, P0222, P0223, P2101, P2102, P2103, P2111, P2119, P2122, P2123, P2127, P2128, P2135 and/or P2138.
^
To replace ECM.
^
To replace throttle body and/or APP sensor assembly.
