SX4 4WD L4-2.0L (2008)
Accelerator Pedal Position Sensor: Testing and Inspection
Accelerator Pedal Position (APP) Sensor Assembly Inspection
Accelerator Pedal Position (APP) Sensor Assembly Inspection
Check APP sensor (main and sub) output voltage as the following steps.
1. For APP sensor (main), arrange 3 new 1.5 V batteries (1) in series (check that total voltage is 4.5 - 5.0 V) and connect its positive terminal to "Vin
1" terminal (2) and negative terminal to "Ground 1" terminal (3) of sensor. Then using voltmeter, connect positive terminal to "Vout 1" terminal
(4) of sensor and negative terminal to battery.