SX4 4WD L4-2.0L (2008)
b. For TP sensor (sub), arrange 3 new 1.5 V batteries (1) in series (check that total voltage is 4.5 - 5.0 V) and connect its positive terminal to
"Vin" terminal (2) and negative terminal to "Ground" terminal (3) of sensor. Then using voltmeter, connect positive terminal to "Vout 2"
terminal (4) of sensor and negative terminal to battery.
c. Measure output voltage variation while throttle valve is opened and closed as the following specification.
If sensor voltage is out of specified value and linear variation as the following graph, replace electric throttle body assembly.
