SX4 4WD L4-2.0L (2008)
MAF signal voltage of MAF and IAT sensor with ignition switch turned ON: 0.5 - 1.0 V
7. Start engine and check that voltage is lower than 5 V and it rises as engine speed increases.
MAF signal voltage between "C01-26" terminal circuit and "C01-27" terminal circuit of special tool.
MAF signal reference voltage of MAF and IAT sensor at specified Idle speed: 1.0 - 1.5 V
8. If check result is not as specified above, cause may lie in wire harness, connector connection, MAF and IAT sensor or ECM.