SX4 4WD L4-2.0L (2008)
Air Bag Harness: Service and Repair
Except Advanced Air Bag
Passenger Air Bag (Inflator) Module Repair Harness Installation
Replace passenger air bag (inflator) module repair harness (2) according to the following procedure when the harness (9) connected with passenger air
bag (inflator) module of the air bag harness included in instrument panel harness (7) and passenger air bag (inflator) module connector (1) is damaged.
1. Disable air bag system. Refer to Disabling Air Bag System:Except advanced Air Bag.
2. Remove passenger air bag (inflator) module referring to Passenger Air Bag (Inflator) Module Removal and Installation:Except advanced Air Bag
if it has installed.
3. Disconnect floor harness joint (yellow) connector (1) with passenger air bag (inflator) module of air bag harness included in instrument panel
harness from floor harness located near the glove box.