SX4 4WD L4-2.0L (2008)
Air Bag Control Module: Testing and Inspection
Advanced Air Bag
SDM Inspection
Reference: SDM Removal and Installation:Advanced Air Bag
WARNING:
^
During service procedures, be very careful when handling a Sensing and Diagnostic Module (SDM).
^
Be sure to read Precautions on Service and Diagnosis of Air Bag System:Advanced Air Bag before starting to work and observe every
precaution during work. Neglecting them may result in personal injury or inactivation of the air bag system when necessary.
CAUTION:
^
Do not connect a tester whatever type it may be.
^
Never repair or disassemble SDM.
^
If SDM has been dropped, it should be replaced.
If any faulty condition is found in the following checks, replace.
^
Check SDM for dents, cracks or deformation.
^
Check SDM connector for damage, cracks or lock mechanism.
^
Check SDM terminal for bend, corrosion or rust.
