SX4 4WD L4-2.0L (2008)
Deployment / Activation Inside of Vehicle
When the vehicle will be destroyed, or salvaged for component parts, deploy the air bag modules and/or activate seat belt pretensioners installed on
vehicle.
NOTE: If equipped with the seat belt pretensioners, activate both side of seat belt pretensioners at the same time when using special tool (C).
1. Turn ignition switch to LOCK position, remove key and put on safety glasses.
2. Remove all loose objects from front seats and instrument panel.
3. Disconnect air bag (inflator) module or seat belt pretensioner connector as follows.
^
For driver air bag (inflator) module:
Remove driver side front pillar lower trim and disconnect driver air bag (inflator) module connector (1).
^
For passenger air bag (inflator) module:
Remove passenger side front pillar lower trim and disconnect passenger air bag (inflator) module connector (2).
^
For side-air bag (inflator) module:
Disconnect side-air bag (inflator) module connectors (1) under front seat cushion.
^
For side curtain-air bag (inflator) module (hatchback model):