SX4 4WD L4-2.0L (2008)
Yaw Rate Sensor: Service and Repair
G Sensor Removal and Installation (4WD Model)
G Sensor Removal and Installation (4WD Model)
CAUTION:
^
Do not drop and shock G sensor. It will affect its original performance.
^
Regarding G sensor removal and installation, confirm specified torque and use hand tool to avoid damage.
Removal
1. Disconnect negative (-) cable from battery.
2. Remove center console box.
3. Disconnect G sensor connector, and remove G sensor (1).
Installation
1. Install G sensor (1), and connect G sensor connector.
Tightening torque
G sensor bolt a: 3.0 Nm (0.3 kgf-m, 2.2 ft. lbs.)