SX4 4WD L4-2.0L (2008)
Yaw Rate Sensor: Initial Inspection and Diagnostic Overview
Yaw Rate / G Sensor Assembly On-Vehicle Inspection
Lateral G Inspection
1. Park and level the vehicle with parking brake and fix wheels with chokes.
2. Check yaw rate / G sensor assembly installation condition.
3. Connect SUZUKI scan tool to data link connector (DLC) (1) with ignition switch OFF.
Special Tool (A): SUZUKI scan tool
4. Turn ignition switch to ON position and select menu "DATA LIST" mode of SUZUKI scan tool.
5. Check "G Sensor (lateral)" under "DATA LIST" of SUZUKI scan tool in the following vehicle conditions.
^
Level condition
^
Right-up condition
^
Left-up condition
If Lateral G condition is out of specification, replace yaw rate G sensor assembly.
Lateral G specification
