SX4 4WD L4-2.0L (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Removal and Installation
Removal
1. Disconnect negative cable at battery.
2. Remove air cleaner case referring to Air Cleaner Assembly Removal and Installation.
3. Disconnect connector from CMP sensor.
4. Remove camshaft position sensor from cylinder head cover.
Installation
1. Install CMP sensor to cylinder head cover.
Tightening torque
CMP sensor bolt a: 11 Nm (1.1 kg.m, 8.0 ft. lbs.)
2. Connect connector to CMP sensor securely.
3. Install air cleaner case referring to Air Cleaner Assembly Removal and Installation.
4. Connect negative cable to battery.