SX4 4WD L4-2.0L (2008)
9. Install ball joint bolt (1), washer (2), strut bracket bolts (4) and new nuts (3) from the direction shown in figure.
10. Tighten suspension arm ball joint bolt (2) to specified torque.
Tightening torque
Suspension arm ball joint bolt a: 60 Nm (6.0 kgf-m, 43.5 ft. lbs.)
11. Tighten new strut bracket nuts (3) to specified torque.
Tightening torque
Strut bracket nut b: 140 Nm (14.0 kgf-m, 101.5 ft. lbs.)
CAUTION: Never reuse the removed strut bracket nut.
