SX4 4WD L4-2.0L (2008)
Front Steering Knuckle: Removal and Replacement
Front Wheel Hub, Steering Knuckle and Wheel Bearing Removal and Installation
Front Wheel Hub, Steering Knuckle and Wheel Bearing Removal and Installation
CAUTION: When removal and installing steering knuckle assembly, be careful not to damage dust boots of control arm joint by drive shaft
dust cover and brake dust cover.
Removal
1. Hoist vehicle and remove wheel.
2. Uncaulk drive shaft nut (1).
3. Depress foot brake pedal and hold it. Remove drive shaft nut (1).
4. Remove caliper carrier bolts and then caliper (1) with carrier.
NOTE: Hang removed caliper with a wire hook or the like (3) so as to prevent brake hose (4) from bending, twisting or tension.
Do not depress brake pedal during caliper removal.
Don't operate brake pedal with caliper removed.
5. Pull brake disc (2) off by using two 8 mm bolts.
