SX4 4WD L4-2.0L (2008)
Reassembly
Judging from abnormality noted before disassembly and what is found through visual check of component parts after disassembly, prepare replacing
parts and proceed to reassembly.
Make sure that wheel side joint assembly (1) and tripod joint housing (2) are washed thoroughly and air dried.
Replace boot(s) (3) with new one(s).
CAUTION:
^
Do not wash boots in degreaser such as gasoline or kerosene. etc. Washing in degreaser causes deterioration of boot.
^
To ensure full performance of joint as designed, be sure to distinguish between two types of grease in repair set and apply specified
volume to respective joint referring to the following for identification of the grease.
