SX4 4WD L4-2.0L (2008)
1. Measure resistance between connector terminals at both ends of the circuit being checked (between "A-1" and "C-1" in the figure). If no continuity
is indicated (infinity or over limit), that means that the circuit is open between terminals "A-1" and "C-1".
2. Disconnect the connector included in the circuit (connector-B in the figure) and measure resistance between terminals "A-1" and "B-1".
If no continuity is indicated, that means that the circuit is open between terminals "A-1"and "B-1". If continuity is indicated, there is an open
circuit between terminals "B-1"and "C-1"or an abnormality in connector-B.
Voltage Check